Visit Create

Windows, macOS or Linux	Android	iOS
Google Chrome 110	Google Chrome 110	Apple Safari 13
Microsoft Edge 110	Mozilla Firefox 110
Mozilla Firefox 110
Apple Safari 13

Check-in (formerly EventBox)

Overview

Visit Check-in is a self-contained software suite that runs under Linux operating system. You may choose to either install it on your computer’s hard drive (this will replace any existing operating system – such as Windows – unless you have a partitioned hard drive), or run it directly from an USB stick (USB 3.0 required).

When using a USB stick, the computer will be required to boot from that device. This is normally configured in the BIOS settings accessible on startup. The exact process varies from machine to machine.

Minimum Hardware

• Intel Core i5 processor or equivalent processor

• 8 GB of RAM

• 64 GB of hard-drive space or a 16 GB USB stick
• Ethernet LAN port or Wi-fi 802.11a/b/g/n

• Free USB ports

The number of USB ports will depend on what you’re connecting – possible devices are: printers, wired scanners, Touchpoint charging docks, external mice, and keyboards. Also the USB sticks – if running from the stick rather than installed on the hard drive.

Network

While there are no specific requirements, the system will require more bandwidth when initially loading and during periods of high activity for syncing data. As a minimum recommendation, a bandwidth of 5 Mbps download and 1 Mbps upload should suffice. Visit Check-in may be used offline, but requires Internet connectivity for the initial setup and for synchronising data with the Visit Cloud.

Check-in Lite (formerly Visit Go)

Windows, macOS or Linux	Android	iOS
Google Chrome 110	Google Chrome 110	Apple Safari 13
Microsoft Edge 110	Mozilla Firefox 110
Mozilla Firefox 110
Apple Safari 13

Visit Connect

Windows, macOS or Linux	Android	iOS
Google Chrome 110	Google Chrome 110	Apple Safari 13 or later
Microsoft Edge 110	Mozilla Firefox 110	iOS 13 or later
Mozilla Firefox 110	Android 5.1 or later
Apple Safari 13